If the floor has to last long, it must be maintained through thorough cleaning and repairing whenever there is any damage. Concrete floor polishing is done to maintain a dazzling appearance. Bacteria may accumulate on the dirty floor. Additionally, when a floor develops some breaks or cracks, then there is a need to make an immediate repair and avoid replacing the whole floor. Here are the repair methods for polished concrete floors in Jacksonville.
- Fragment Repair
The affected area should be free from debris. Then the contractor will choose the best polymer that suits the floor to be repaired. The polymer is overfilled in the affected area and allows some time to dry. The overfilled is later removed. If there is grinding, the polymer is applied after the first grind.
- The Joint Separation
There might be joints in between the concrete slab that is caused by the shrinking. Two methods for polished concrete flooring in Jacksonville can address these joints. The first method is to remove the debris between the concrete slabs and fill the joint with a slower-setting epoxy or semi-rigid polyurea. The other process is to slightly cut out the filler using a saw and apply polyurea polymer to refill the gap.
- Matching Joint Color Fillers
A mismatched color floor looks ugly. The color mismatch is made when the contractor uses a filler with a different color to the floor. There are some companies that do polished concrete floors in Jacksonville that have come up with varying shades of fillers. Therefore, to achieve or regain the floor’s true beauty, the owner or the contractor has to select the filler that matches the color of the floor.
Furthermore, the floor should be kept clean. Here are methods that are used to keep the polished concrete floors on Jacksonville shining.
- When the floor is being used for daily activities, there might be some liquid spills. Some liquids are collusive in that they react with the concrete destroying it. Any liquid spill should not be allowed to sit on the surface for long.
- Dust should be removed even if the floor is not in use. The dirt accumulation may stick and become difficult to detach in the future and make the surface dull.
- Some debris from the roof or wall may accumulate on the floor that may pose a danger to its beauty. Therefore, the floor should be free from solid waste.
- The floor surface should be cleaned regularly using cleaning tools appropriate for the polished floors. Scrubbing is necessary to eliminate any dirt that may have stuck on the concrete floor polishing.
